[vc_row][vc_column][vc_separator][vc_column_text text_larger=”no”]
New Case Isolated Triaxial ICP® Accelerometers
Model 354A04 and 354A05
[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”4134″ img_size=”full” parallax_scroll=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]These accelerometers help ensure low noise
vibration measurements on structures that have
poor electrical grounding.
These models feature:
- Case isolated to ensure accurate measurements
on structures with poor grounding - TEDS IEEE 1451.4 enabled
- Rugged, hermetic construction and titanium housing
- Frequency range 0.4 to 5,000 Hz
- 10 mV/g (354A04) and 100 mV/g (354A05) sensitivity
- Easy installation with ring style mounting configuration
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
New Miniature ICI® Shock Accelerometers
[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”4132″ img_size=”full” parallax_scroll=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]These miniature (0.17 gm) shock accelerometers provide high measurement range (5k g or 20k g) in a durable package with overload shock limits up to 30k g peak. Precisely measure shock
on electronic components with minimal mass loading, over a wide frequency range
of 1.2 to 10,000 Hz, in temperatures up
to 325°F (163°C).[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_single_image image=”4157″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”4126″ img_size=”full” alignment=”center” parallax_scroll=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]Introducing new 6-channel
and 12-channel switch boxes,
641C4X Series, from IMI Sensors.
Features:[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”4127″ img_size=”full” alignment=”center” parallax_scroll=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
- Accommodation of dual signal on every channel
- Collect vibration and temperature data via BNC jack
- Independent, 4-terminal block for each channel
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_single_image image=”4136″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_row_inner][vc_column_inner width=”1/2″][vc_video link=”https://youtu.be/V6vdvqrcG30″ image_poster_switch=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
2-in1 Phantom Powered Preamplifier
Make quality audio measurements with PCB’s 48V
microphone system. Model 426A14, preamplifier
has a versatile, patent pendingmodular design
and mates with any IEC 61094-4 compliant
microphone cartridge.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_single_image image=”4138″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”4139″ img_size=”full” alignment=”center” parallax_scroll=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
Use our 24/7 application engineering assistanceto simplify your rail applications:
- Safety Monitoring
- Condition Monitoring
- Braking Systems
- Monitoring Ride Quality and Passenger Comfort
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_single_image image=”4140″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_single_image image=”4156″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
New Case Isolated Triaxial ICP® Accelerometers – Model 354A04 and 354A05
[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”4135″ img_size=”full” alignment=”center” parallax_scroll=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]These accelerometers help ensure low noise
vibration measurements on structures that
have poor electrical grounding.
These models feature:
- Case isolated to ensure accurate measurements
on structures with poor grounding - TEDS IEEE 1451.4 enabled
- Rugged, hermetic construction and titanium housing
- Frequency range 0.4 to 5,000 Hz
- 10 mV/g (354A04) and 100 mV/g (354A05) sensitivity
- Easy installation with ring style mounting configuration
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text]
[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
New Ground-Isolated High Temperature Mini Triaxial ICP® Accelerometer
[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”4130″ img_size=”full” alignment=”center” parallax_scroll=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
Product highlights:
- Permanently ground isolated to help reduce electrical noise and ground loops on your test article
- High temperature vibration measurements
(temperature range -65 to 356 °F, -54 to 180 °C) - Fits in tight test environments – small size 0.28 in.
(7 mm) and a lightweight 1 gram mass - Housings won’t scratch like aluminum anodized types – rugged, hermetic construction and titanium housing
- Ideal for environmental stress screening and NVH testing in high temperature environments
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_video link=”https://youtu.be/33wAMHKeb4Y” align=”center” image_poster_switch=”no”][vc_column_text text_larger=”no”]
WSTĘPNIE SPOLARYZOWANY MIKROFON POLA SWOBODNEGO 1/2” ODPORNY NA WODĘ I PYŁ
[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
Zastosowania:
- Brakenoise testing / Testy hałasu hamulców
- Tire noise analysis / Analiza hałasu opon
- Acoustic holography / Holografia akustyczna
- Beamforming
- Noise source identification / Identyfikacja źródeł dźwięku
- Non-contact defect detection / Bezkontaktowa detekcja defektów
- Testy akustyczne w trudnych warunkach pracy: wysokiej wilgotności, zapyleniu, zagrożeniu zachlapaniem olejem
- Leak detection / Detekcja przecieków
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”4133″ img_size=”full” parallax_scroll=”no”][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_single_image image=”4128″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
- SENSITIVITY: (±10%) 100 MV/G (10.2 MV/(M/S²))
- Measurement Range: ±50 g pk (±491 m/s² pk)
- Broadband Resolution: .0003 g rms (.003 m/s² rms)
- Frequency Range: (±5%) 8.0 to 5500 Hz
- Electrical Connector: 4-Pin, M12
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”4149″ img_size=”full” parallax_scroll=”no”][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
ICP® Accelerometers with Flexible, Integral Cable
[/vc_column_text][vc_single_image image=”4154″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]
Models 352A71, 352A72, 352A73 and 352A74 are miniature teardrop ICP® accelerometers. The series features three different sensitivity options and a flexible twisted pair integral cable for easy routing. Flexible potting material adds strain relief where the cable exits the sensor. All the accelerometers are hermetically sealed in a titanium package. They can be powered by any ICP® signal conditioner or data acquisition system that includes 18 to 30 VDC and 2 to 20 mA of constant current.
[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
HIGHLIGHTS:
- VERY SMALL TEARDROP-SHAPE
- FLEXIBLE INTEGRAL CABLE FOR EASY ROUTING IN TIGHT SPACES
- HERMETICALLY SEALED TITANIUM HOUSING
- THREE SENSITIVITY OPTIONS: 5 MV/G, 10 MV/G, 100 MV/G
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
APPLICATIONS:
- SMALL COMPONENT VIBRATION TESTING
- ELECTRONICS AND CIRCUIT BOARD QUALIFICATION
- DROP TESTING AND PACKAGE TESTING
- SHORT TERM UNDERWATER TESTING
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
ICP® ACCELEROMETERS WITH QUARTZ ELEMENT
[/vc_column_text][vc_single_image image=”4152″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]
[/vc_column_text][vc_column_text text_larger=”no”]
Czujniki do prac badawczo-rozwojowych oraz oceny stanu maszyn i utrzymania ruchu
[/vc_column_text][vc_single_image image=”4142″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”4144″ img_size=”full” alignment=”center” parallax_scroll=”no”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
Czujniki i oprzyrządowanie do mierzenia drgań, hałasu, ciśnienia, siły i naprężenia
[/vc_column_text][vc_column_text text_larger=”no”]
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_single_image image=”123″ img_size=”full” alignment=”right” parallax_scroll=”no”][vc_column_text text_larger=”no”]Wyślij zapytanie[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
IMI Sensors: Iunstrmentation
for High Temperature Environments
[/vc_column_text][vc_column_text text_larger=”no”]
SENSORS FOR MACHINERY HEALTH MONITORING
[/vc_column_text][vc_single_image image=”4129″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]Accelerometers & Pressure Sensors
- Operating Temperatures Up to 1200 °F (650 °C)
- Featuring UHT-12™ Element Technology
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text text_larger=”no”]
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_single_image image=”4137″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_single_image image=”4131″ img_size=”medium” alignment=”right” parallax_scroll=”no”][vc_column_text text_larger=”no”]Wyślij zapytanie[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
IMI Sensors Launches Very High Temperature Charge Accelerometer with UHT-12™ Element
[/vc_column_text][vc_single_image image=”4153″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]July 20, 2016 DEPEW, NY – IMI Sensors, manufacturer of industrial vibration
monitoring instrumentation, announced the release of Model 357A100, a very high
temperature differential charge accelerometer with a UHT-12™ sensing element.
IMI has developed the sensor to be used in the commissioning of nuclear power
plants, condition monitoring of power generation and aviation gas turbines and
machinery protection in very high temperature environments.
The new UHT-12™ crystal technology features:
· Absence of pyroelectric noise spikes up to 900 °F (482 °C).
· Sensitivity that remains more consistent over a wide temperature change.
· Shear mode crystals isolated from base strain & transverse measurement errors.
· No depletion of oxygen at high temperatures, thereby not requiring a vent or window in the housing.
IMI offers various differential charge amplifiers to support the launch of Model 357A100, including Models 421A3X, EX682A40 and 422M182. Additional information about IMI’s complete line of high temperature vibration sensors can
be found here.[/vc_column_text][vc_column_text text_larger=”no”]
[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
Understanding Acoustic System Noise Floor
[/vc_column_text][vc_column_text text_larger=”no”]Learn how to:
- Determine the total noise floor of your measurement chain
- Use the optimal signal to noise ratio to make accurate measurements
Watch this acoustic measurement video by Dr. Andrew Barnard, Michigan Technological University.[/vc_column_text][vc_single_image image=”4173″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]
Visit the Acoustics Video Library for additional educational videos
and 'Tips from Techs’ or ’Ask one of our Acoustic Experts’.
[/vc_column_text][vc_column_text text_larger=”no”]Wyślij zapytanie[/vc_column_text][vc_separator][vc_column_text text_larger=”no”]
Questions about force sensors? Get Answers.
[/vc_column_text][vc_single_image image=”4155″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]Do you have questions about making force measurements, selecting force sensors, sensor mounting, effect of discharge time constant, power requirements, and/or calibration? PCB Piezotronics has the answers![/vc_column_text][vc_column_text text_larger=”no”]
[/vc_column_text][vc_column_text text_larger=”no”]
Made Tough: Test Where Other Microphones Fail
[/vc_column_text][vc_single_image image=”4146″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]PCB’s new Model 130A24, ½” ICP® Water and Dust Resistant Prepolarized Array Microphone system can make measurements in harsh environments, prone to contaminants such as:
- Rain
- Dust
- High humidity
- Oil splash
With an IP-55 rating, this system is ideal for applications, such as tire well testing, brake noise testing, and noise source identification.[/vc_column_text][vc_column_text text_larger=”no”]
Wyślij zapytanie[/vc_column_text][vc_column_text text_larger=”no”]
603 Series Low Cost ICP® Accelerometers
[/vc_column_text][vc_single_image image=”4148″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]IMI Sensors has developed the 603 Series, a line of ICP® accelerometers for industrial vibration monitoring applications. All of the sensors in the product line include a shear-mode ceramic element housed in a rugged hermetically-welded stainless steel enclosure. All models include case-isolated electronics to eliminate noise issues.[/vc_column_text][vc_column_text text_larger=”no”]
Wyślij zapytanie[/vc_column_text][vc_column_text text_larger=”no”]
ICP® Accelerometers for Route-Based Predictive Maintenance
[/vc_column_text][vc_single_image image=”4145″ img_size=”full” alignment=”center” parallax_scroll=”no”][vc_column_text text_larger=”no”]
Designed to optimize manpower utilized on walk-around monitoring routes.
[/vc_column_text][vc_column_text text_larger=”no”]
Wyślij zapytanie[/vc_column_text][/vc_column][/vc_row]